MIL-S-21041C
*2.2 Other publications. The following documents form a part of this specification to the extent specified herein. Unless otherwise indicated, the issue in effect on date of invitation for bids or request for proposal shall apply. Technical society and technical association specifications and standards are generally available for reference from libraries. They are also distributed among technical groups and using Federal agencies.
AMERICAN SOCIETY FOR TESTING MATERIAL
A-123 Zinc (Hot-Galvanized) Coating on Products Fabricated from Rolled, Pressed, and
Forged Steel Shapes, Plates, Bars and Strips.
(Application for copies should be addressed to the American Society for Testing Materials, 1916 Race Street, Philadelphia PA 19103.)
NATIONAL MOTOR FREIGHT TRAFFIC ASSOCIATION, INC., AGENT National Motor Freight Classification
(Application for copies should be addressed to the American Trucking Associations, Inc., ATTN: Tariff Order
Section, 1616 P Street NW, Washington DC 20036). UNIFORM CLASSIFICATION COMMITTEE, AGENT Uniform Freight Classification
(Application for copies should be addressed to the Uniform Classification Committee, ATTN: Tariff Publishing
Officer, Room 1106, 222 South Riverside Plaza, Chicago IL 60606.)
3. REQUIREMENTS.
3.1 General. Material covered by this specification shall be of good design, new construction, convenient to handle and suitable for the intended purpose. All material and accessories shall be fabricated in accordance with first class commercial practices. Bending, flanging, perforating, forming and similar operations shall be
performed in a manner to insure that there are no ruptures, cracks, unsightly wrinkles or other defects in the material. Unless otherwise specified, material will be fabricated to commercial tolerances.
*3.1.1 Standard Products. The slotted metal angles, the preformed metal shelving panels and nuts and bolts for assembly shall be the manufacturer's commercial product except for any changes necessary to comply with specification requirements. All like items furnished under any one contract, including parts and subassemblies thereof, shall be new and interchangeable. The nominal thicknesses of the angles and panels shall be the manufacturer's standard thickness corresponding to the required gages so long as these thicknesses approximate the current industry standards relating gages and thickness.
3.2 Unit A.
*3.2.1 Unit A, Types 1, 2, 3 and 4 shall be formed slotted steel angle conforming to QQ-S-698 Half-hard Temper, 60,000 psi minimum yield or QQ-S-775, Class d, Cold Rolled Half-hard No. 2 Temper, 60,000 psi minimum yield.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business