A-A-51493
|
C. |
Place the test unit on a flat and level surface. Place a second unit (not being tested) on top of the test unit. Load 47 to 48 pounds on the second unit, allowing the second unit to transfer its load weight on to the test unit. Examine the test unit for damage. Remove the test load and second unit. Examine the test unit for damage. There shall be no evidence of damage |
|
D. |
Apply a 20 pound tension force between two opposite sides (sides with longest lengths). The locations of force contact shall be on top outside of the bin, within 1/4 inch of the top, on the centerline between the front and back of the bin. Maintain the application of this force for 5 minutes. Examine the bin for cracks and /or other damage excluding deformation. There shall be no evidence of damage. Repeat test A above. |
Contractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers’ own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Regulatory requirements.
Federal Food, Drug and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations.
Recovered materials. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practical.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business