A-A-50104B
3. QUALITY ASSURANCE.
3.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics and requirements of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
3.2 Metric product. Products manufactured using metric units will be considered on an equal basis with those manufactured using inch-pound units, provided that the products measurements fall within specified tolerances using conversion tables contained in the latest revision of FED-STD-376 and that all other requirements of this CID are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product.
3.3 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practical.
4. PACKAGING.
4.1 Packaging. The storage rack shall be packaged, packed, and marked in accordance with the domestic or overseas requirements of ASTM D 3951, as applicable.
5. NOTES
5.1 Intended use. The storage racks are for indoor use. Style A racks are 36 inches wide and have wire mesh deckling for non-palletized storage. Style B racks are 42 inches wide and are used only for palletized storage.
5.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this document.
b. Size rack required (see 1.1).
c. Number of upright frames (see 2.2).
d. Number of load beams (see 2.3.2).
e. Number of units of wire mesh decking (see 2.4).
f. Number of back-to-back connectors (see 2.6).
5.3 Source of documents.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business