A-A-50103A
2.6 Standards compliance. The rack components shall comply with ASTM A 123 for hot galvanized dipped coating.
3. QUALITY ASSURANCE
3.1 Certification. The contractor shall certify that the product offered meets the salient characteristics of this description, conforms to the producer’s own drawings, specifications, standards, and quality assurance practices, and is the same product sold in the commercial marketplace. The government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
3.2 Metric product. Products manufactured using metric units will be considered on an equal basis with those manufactured using inch-pound units, provided that the products measurements fall within specified tolerances using conversion tables contained in the latest revision of FED-STD-376 and that all other requirements of this CID are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product.
3.3 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practical.
4. PACKAGING
4.1 Packaging. The storage rack shall be packaged, packed, and marked in accordance with the domestic or overseas requirements of ASTM D 3951, as applicable.
5. NOTES
5.1 Intended use. The beltless, steel, pallet racks are intended for storing palletized loads.
5.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this document.
b. Size rack required (ace 1.1).
c. Number of upright frames (see 2.2).
d. Number of load beams (see 2.3).
e. Number of units of wire mesh decking (ace 2.3.1).
f. Number of back-to-back connectors (see 2.4).
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business