20 June 1986
COMMERCIAL ITEM DESCRIPTION
The General Services Administration has authorized the use of this commercial item description.
This commercial item description covers a plastic storage bin. The storage bin shall have a molded slot on the front for an identification card. The storage bin shall be used for storing supplies in a military medical facility.
The bin shall be fabricated of high-density plastic and have a molded slot on the front vertical surface for an identification card and shall be designed with a sloping front hopper for easy access.
The bin shall have a smooth finish with exterior corners and edges rounded and have the following overall dimensions:
Length: 13-1/4 inches (34.39 cm)
Width: 11-3/8 inches (28.89 cm)
Height: 6 inches (15.24 cm)
The bin shall be designed with a reinforcement rim around the top wall, two side walls, extending forward down an open slope on both sides to a front hopper ledge. This slope shall be 20 degrees from vertical. The rim shall be 3/8 inch high and capable of accommodating a noncomponent sliding lid. When the lid is in place and closed, it shall be contained within the rim vertically and horizontally, overlapping the entire bin ledge, off the hopper ledge and continue sliding forward and be removed from the bin. A template of the lid to be accommodated shall have two surfaces, a top surface and a forward surface sloping downward, having the following dimensions:
Thickness: 0.065 inch (0.165 cm)
Width: 11-1/16 inches (28.10 cm)
Top length: 11-5/16 inches (37.33 cm)
Sloping length: 2-11/16 inches (6.83 cm)
Angle of slope: 20 degrees
This template shall be capable of being removed only by sliding it forward.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business